how to clean spray on bedliner

Your truck bed takes a beating every week, and without proper care, that grime quietly wears down the coating protecting it. Knowing how to clean spray-on bedliners correctly makes a real difference in how long they last. Whether you recently had spray-on bedliners applied or have owned one for years, routine care keeps the coating performing the way it should.

In this guide, KNF Customs will explain how to clean your spray-on bedliner step by step, from removing loose debris all the way to applying UV protection.

Start by Removing Dirt and Debris From the Bedliner

Removing debris is the first step in learning how to clean spray-on bedliners properly. First, clear everything out of the truck bed, and then use a stiff-bristle brush to sweep out loose gravel, sawdust, and dry buildup. Washing over loose debris just turns it into muddy runoff that gets trapped in the texture.

For stuck-on mud or dried material, let water soak the spot for a few minutes first. Softening it before scrubbing saves time and reduces the risk of grinding abrasive particles into the coating.

Pressure Washing Bedliners

Pressure washing a bedliner is one of the most effective ways to blast embedded dirt out of the textured surface. Use a medium-pressure setting and keep the nozzle moving rather than holding it in one spot.

Rinse from front to back so dirty water flows out over the tailgate. The texture of a spray-on liner traps fine particles that a garden hose alone won’t dislodge.

Tackle Grease and Stains

Daily rinsing handles most surface grime, but oil and chemical residue need something stronger. A quality degreaser for bedliners cuts through oil and residue without damaging the coating. Look for one that’s safe for polyurethane or polyurea surfaces specifically.

Apply it directly to the stained area, let it dwell, scrub with a stiff brush, and rinse clean. Before choosing a bedliner, it’s worth knowing the material’s maintenance requirements. Always follow the manufacturer’s recommendations for your specific product.

Finish With Bedliner UV Protection

The last thing to remember when learning how to clean spray-on bedliners is to apply a UV protection product. UV rays gradually fade and degrade the surface over time, especially in sunny climates. A UV protectant made for rubber or polyurethane coatings creates a barrier against sun damage and keeps the surface looking fresh.

Apply it after every deep clean, or at least a few times a year as part of your regular truck bedliner maintenance. Let it cure before reloading the bed.

Keep Your Truck Protected With Our Help

Regular spray-on bedliner cleaning is one of the best things you can do for your truck to ensure its appearance and longevity. Our team at KNF Customs installs premium bedliners designed for long-term durability. We know how proper maintenance works hand in hand with preventing rust and protecting your truck bed year-round. We back every bedliner installation with a lifetime warranty.

Call KNF Customs at (321) 733-5240 to schedule a service in Melbourne, Florida, or to learn more about how to clean spray-on bedliners.

Similar Posts